|
Show IMEI code
If you need to know what's the IMEI code of your
phone, simply press:
* # 06 #
you'll read it on display.
Cell Broadcast
If your phone do not show incoming Cell Broadcast
(CB) messages, try to set second language to
English
PIN-OUT
Here is the pinout for all of you who like to
experiment with it:

1 - GND 2 - TX_AUDIO 3 - AUDIO_GND 4 -
nHF_ON (L=ON) -> L=H/F ON 5 - nAOP_SENSE <- DATA ADAPTOR SELECT 6 -
SERIAL_UP <- UART up (9600,33.8kbps) 7 - SERIAL_DOWN -> UART down 8 -
EXT_PWR <- POWER FOR CHARGING 9 - GND 10 - RX_AUDIO -> 11 - nRADIO_MUTE
-> L=MUTE 12 - nHF_SENSE <- L=H/F MODE 13 - RESERVED L=FLASH WRITE ENABLE
14 - IGNITION <- H=ON 15 - nLOGIC_PWR -> H=HANDSET ON 16 - PAON -> POWER
AMPL.CONTROL SIGN.
|